Angular contact ball bearings include single row & double row, the bearings are also available in open and sealed designs.

In single row angular contact ball bearings, the raceways are arranged such that the forces are transmitted from one raceway to the other at a specific contact angle.

The axial load carrying capacity increases with the contact angle. Due to the large contact angle, single row angular contact ball bearings are more suitable than deep groove ball bearings

for supporting large axial forces acting in one direction.

Single row angular contact ball bearings can support radial loads and unilateral axial loads. They are adjusted against a second bearing that provides counter guidance.

Double row angular contact ball bearings are similar in design to a pair of single row angular contact ball bearings in an O arrangement. In this case, the apexes of the cones formed by the ball contact lines point outwards.

Double row bearings can support high radial forces as well as axial forces in both directions and are particularly suitable for rigid axial guidance arrangements. Depending on the series, the bearings are designed with or without filling slots.

ZORR can provide you with the following series of bearings and more:
     

7000  7000-2RSR
      7200  7200-2RSR 
      7300  7300-2RSR
      3800-2RSR
      3900-2RSR
      3000-2RSR
      3200-2RSR
      3300-2RSR